Door and windows frame pvc profile extruder / production line
Door / windows frame pvc wpc profile production line is used to
produce pvc / wpc door frame profile.
WPC profiles extrusion lines have almost the same specifications ,
just different moulds,also the extruder can be changed smaller.
WPC profiles has many specifications,just like the picture:
Door / windows frame pvc laminated profile production line project evaluation:
According to your requirement, we’d like to recommend our SJZ65/132
PVC Profile Extrusion Line.
This extrusion line is co mposed of SJZ65/132 Conical Twin screw Extruder and downstream assistant
machine. Please check the below information:
based material : PVC powder,CaCo3.
Additive : Coupling,Lubricant
Material form : All the material should be mixed completely.
Finished product : PVC Profile;
Output capacity : 150～200kg/hr (depending on finished product)
Basic Infrastructure ( Provided by customer )
a. Space for profile extrusion line in workshop:
About 22m (length)×2.5m(width)×3m(height) (Adjustable according to
your factory. We ask you to show us
the design draw of your workshop).
b. Electricity network: 380V/60Hz (Adjustable according to your
local voltage standard).
c. Wire/cables: wires/cables from customer’s general control
cabinet to the main control cabinet for profile
extrusion line; all electrical cable from the main control cabinet
to each machine.
d. Water supply: main water pipeline supply and water pipes to
e. Means for lifting the machines when unloading and positioning.
f. Everything else not clearly mentioned above.
Here is a list of the Door / windows frame pvc profile extruder / production line equipment:
1, Automatic feeder
2, SJ65 / 132 conical twin screw extruder
4, Calibration platform
5, Haul - off
7, Stacker ( tipping table )
5, Drilling machine
6, Hot stamping machine
7, Embossing machine
8, Staning machine
Technology and Service:
1. Seller supply full set of technical document, cutter and other
full document (write in English).
2. Seller supply training for buyer’s staff until buyer can produce
the eligible production independently.
3. Seller is responsible for installing, testing, adjusting and
debugging the machines in buyer’s factory.
4. Buyer should pay the expense for our engineers including for our
engineer including round-
way tickets, inland traffic, lodging and boarding fee when the
machine is installed, tested and maintained.
5. Seller will go to install machines after the machine is arrived
at buyer and buyer will have prepared all
conditions (including power, water, compress air, tools and
materials for producing pipe, etc) for installing
and testing these machines. Buyer should pay 60USD/day.
6. When installing,people of both sides cooperate well and
carefully,buyer supplies convenient working
condition,any problem, should discuss peacefully and kindly.
7. Buyer supply proper working tools, equipments and other
8. The expense including the accommodation and materials of the
run the machine for testing and other expenses(electric, water, air
and worker) will be on seller’s account,
if the buyer or their representatives do the inspection of the
machines before shipment.
9. Guarantee period: 14 months after shipment (the date of B/L)